Customized Professional Camera Crane
Customized Professional Camera Crane
1. 10m/32.8ft professional camera crane
2. Use Japan motors with lower noise
3. Unique connector box with 6 connectors on head
4. Simple design with only two sets of steel guy wire
5. The tripod is adjustable from 1.2m to 1.6m
6. The crane can be setup as 9.6m and 7.4m
- Description
- Inquiry
Customized Professional Camera Crane
Specifications
Pan and Tilt Head
1. Use L shape pan and tilt head which can bear 10kgs weights
2. Use Japan motors with lower noise
3. There is a connector box with 6 connectors on head
4. The 6 connectors are for 12v camera power, 7v camera power,
light, monitor, motor power, camera lens
5. Optional pan tilt roll 3 axis head (will add extra cost)
Main Cable
To connect head and control parts
Big Control Box
1. With buttons of work light, error light, center, speed, damp etc.
2. Support video in, video out
3. Contain batteries and with charger
Two Controllers
1. One head controller with joystick + one zoom controller
2. Remote control pan, tilt, zoom, camera start/stop etc.
3. AC or DC operation
10 Inch HD Monitor
1. With monitor hood
2. Optional HDMI and SDI connector (will add extra cost)
Arm Body
1. Material is high-strength aluminum alloy
2. Use triangle arm body with side length 13*13*13cm
3. The arm body length is 1.2m/pc
4. Consisit of 8pcs arm body
5. The crane can be setup as 9.6m and 7.4m
Two Sets Steel Guy Wire
1. Unique V shape make design more simple and nice
2. The wire length is 9.6m and 7.4m
Ajustable Tripod
1. Adjustable tripod with height from 1.2m to 1.6m
2. T shape tripod with 6 wheels is more stable and safe
Packing
1. Use two aluminum box as packing
2. Head box use sponge inside to protect the parts
Lifetime Warranty
It means if any device have problem within 1 year (under correct using),
we will send free replacements. After 1 year, we will offer free repair or
just charge material cost for replacements